PowerPlant Amplifiers feature superior thermal conductivity ensuring heat dissipates efficiently and boast advanced four way circuit protection - thermal, short circuit, output short and short to ground. The single piece heatsink extrusion efficiently draws heat away from output devices, maximising available output power. Large gauge terminals blocks enable heavy cable use to guarantee the full output potential of PowerPlant is realised.
- Variable LPF (35Hz-350Hz)
- Variable HPF (35Hz-350Hz)
- Crossover Selector Switch for easy selection of filter
- Output RCA Terminals for Daisy Chaining audio signal in multiple amplifier installations
- Diecast Diamond Cut Endcaps incorporating mounting feet for cleaner installation
- 45deg Angled power terminals. Accepts 4 guage amplifier kit cable. Easy to install - not crimped terminals on cable
| Bass Boost @ 45Hz | 0dB - 6dB (CH3 & 4) | | | Channel Seperation | >50dB |
| Frequency Response (-3dB) | 10Hz - 110kHz | | | Fuse Rating | 35A x 3 |
| Input Impedance | 20K | | | Input Sensitvity | 0.2V - 8V |
| Max Power Rating (Watts) | 1200 | | | Ratings per Channel | 125 Watts RMS per Channel @ 4 Ohms: 165 Watts RMS per Channel @ 2 Ohms: 330 Watts RMS Bridged @ 4 Ohms |
| Signal to Noise | >87dB | | | THD @ Rated Power | 1% (1kHz) |
| Variable High Pass Filter | 6dB / Octave | | | Variable Low Pass Filter | 6dB / Octave |